Deep Well Submersible Water Pump (4SP 8T)

Deep Well Submersible Water Pump (4SP 8T)

Deep Well Submersible Water Pump (4SP 8T)

Send InquiryChat Now
Product Details

Deep Well Submersible Water Pump (4SP 8T)


1.Product Introduction 


Product Features

Strong tidy appearance by integrated S.S body

Application voltage 150-230V,start by 80V

High Flow,High Delivery,High Efficiency

Better performance of anti-sand with S.S structure

Free fit motor with higher precision and longer service time



2.Product Parameter(Specification)


4SP8T                                                        PERFORMANCE DATA 50Hz Outlet: :G1"-1¼"

 MODEL

 POWER




 DELIVERY

 n=2850 r/min

1~

3~

 

(KW)

 

(HP)

 

Q

m³/h

0

3

5

8

10

11

220-240V

380-415V

L/min

-

50

83

133

167

183

4SPD805-0.75

4SPD805-0.75

0.75

1

 

 

 

Head

(m)

30

26

24

19

14

10

4SPD807-1.1

4SPD807-1.1

1.1

1.5

42

36

33

27

20

14

4SPD810-1.5

4SPD810-1.5

1.5

2

60

52

47

38

28

21

4SPD814-2.2

4SPD814-2.2

2.2

3

84

72

66

54

40

29

4SP818-3

3

4

108

93

85

69

51

37

4SP821-4

4

5.5

126

108

100

80

59

43


3.Product Feature And Application 


Garden water

Farmland Irrigation

Landscape Fountion

Domestic Water

Sewage Discharge

Industrial Water


image.png


4.Production Details 



image.png


201804121917559612485.png



5.Product Qualification


image.png


image.png


6.Maintenance 


1 Before doing anything such as disconnect the system, unplug and so on, should ensure that there is no possibility of connections.

2 Repair of the pump by personnel not authorized by the manufacturer will render the guarantee null and void and will entailaccidental operating with potentially dangerous equipment.

3 Caution: any tampering may lead to performance being reduced and danger to persons and/or things.

4 The pumps do not require any maintenance as long as the following precautions are taken:

Where there is the risk of freezing or the pump is not sufficiently submerged, the pump should removed from the water, emptied and kept in a dry place.

5 Do not submerged the pump in water for a long time when unused, should be running in clean water for a few minutes to both inside and outside of the pump, then put in a room with good ventilation.

6 The pump was equipped with a thermal protector which has both of temperature and current protections such as: temperature is too high, current is too big, voltage is too low and short of phase, the power supply will be cut off automatically to protect the motor. When the pump stops operation because of some trouble, should cut off the power and find out the reasons.

After the trouble removed, the pump can run again.

7 If some problems appeared both of pump and motor, would be repaired by the experienced technicians or send the pump to the maintenance department of our company, otherwise we have not any responsible.

8 You are advised to check the following periodically.

9 The condition of the cables and grommets, especially at their attachment points.


7.FAQ


Q: Is OEM and ODM service available?

A: Of course. We have many years experience of OEM & ODM service.


Q: How about your warranty?

A:  We usually provide 1-year warranty , according to our general conditions.


Q: How to proceed an order for water pump?

A: Firstly let us know your requirements ( product details ).

Secondly We quote according to your requirements or our suggestions.

After then we arrange the production after receive your deposit.


Hot Tags: deep well submersible water pump (4SP 8T), China, manufacturers, suppliers, factory
Related Products
Inquiry