Knowledge
Home > Knowledge > Content
Precautions for the use of deep well pumps
- Aug 15, 2018 -

In today's deep well pump is widely used in agriculture, it can not only improve the efficiency of agricultural work, but also reduce manpower consumption, which is a very economical product for many large agricultural households. However, the vast majority of farmers do not understand the deep well pump, they will not be maintained at all, and even their use methods are problematic, which will greatly reduce the service life and work efficiency of the pump. Let me talk about some points of attention in the use of deep well pumps.


1. It is not suitable to start frequently


Deep well submersible pumps should not be started frequently because there is a backflow when the pump is stopped, and immediate start will cause the motor load to start.


2. The voltage is abnormal and should not be turned on.


When the voltage is too high or too low, the pump will heat up too much, which will shorten its service life and even burn it out.


3. Stop immediately when there is an abnormality


In the use of deep well submersible pumps, it is necessary to use the person to look around, and the abnormal stop immediately, and the pump is not turned after the inspection.


4. Start up regularly


When the pump is not used for a long time, we also need to turn it on regularly to prevent rust. Generally, it is best to open once a week.