Submersible trash pump [WQ(D)Y7T]
1. Product Introduction
Adopted the most advanced cutting structure, with large flow, high delivery, strong cleaning ability, well deserved the most ideal & practical cutting pump and the best-selling products beyond the user’s expectation.
1.Application Voltage 150~230V (Start by 80V / 380V
2.Sewage/Clean water, the temperature can not exceed 40℃
3.PH of water : 4 ~ 10
4.Frequency : 50Hz, Voltage : single-phase 220V,
5.Range of voltage fluctuation: ± 10% of the rating
6.Immersion depth can not more than 5m and can not lower than the height of pump.
Widely used in construction sites, mines and factories,septic tanks,municipal environmental protection and so on,can be used for sewage with long fiber, plastic bag,cloth, rope and leaves.more can be used in clear water irrigation and drainage.
3.Product Feature And Application
6.Inst allation,use and points for attention
1.Check nameplate and confirm if actual use conditions conform to specification and propreties specified in the nameplate.
2.Before using pump, please completely check if cable, plug and pump body is in sound condition, if bolts in all parts loose and if oil oozes out of pump shell. If find broken or damaged parts,you should replace them to avoid work in spite of fault.
3.Test and measure if the fluctuation scope of voltage is within ?10% of the rated voltage. Otherwise, it will decreae life of motor or even spoil motor. If the place where pump is used is far away from elctricc source, you should use suitable thicker conveyer wire (please see to it that diameter of conveyer wire should be thicker than source lead-in wire of pump). When voltage of power source is too low, may cause the results that pump draws no water out or draw water out very siowly after pump is plunged into water and switched on. At the moment, no-load start is suggested, you can sink pump into water when it has operated well.
Our submersible trash pumps have been engineered to provide long lasting pumping performance with economic advantages that no other pump can match. Yet, even a well-designed and well-built pump can malfunction or become hazardous in the hands of an experienced or untrained user. Anyone that operates or comes in contact with these products must thoroughly read and understand this manual and related equipment manuals prior to handling, operating or servicing these pumps.
Q: What's your delivery time? If i need products very urgent, how can i get it?
A: Our delivery time usually within 20-25workdays, and urgent order please check with our sales and who will offer a good delivery time for you according to your urgent request by express shipping.
Q: Can I get some samples?
A:We are pleased to offer you samples.
Q: Are you a factory or trading company?
A: We are a factory.