Immersible Water Pump [Q(D)XY 65T]
1.Product Introduction
Product Overview Well-deserved for the best QDX submersible pump, which are perfect match between technology advantage of low voltage, full & high delivery, with graceful appearance by using corrosion resistance materials of imported PPO for basement & cap,S.S body & filter net.Adopts imported PPO (king plastic) on foot, cap, stainless steel barrel, net, etc. corrosion resistance materials.A perfect match between neat and easy appearance , graceful lines & inherent advantages of the low voltage,full delivery,well-deserved for the best pump of both internal and external. | Operating Conditions 1.Clean water,the temperature can not exceed 40℃ 2.Volume of solid impurities in the medium : ≤0.1%, Particle size : ≤0.2mm 3.PH of water : 6.5 ~ 8.5 4.Frequency : 50Hz, Voltage : single-phase 220V, three-phase 380V 5.Range of voltage fluctuation: ± 10% of the rating 6.Immersion depth can not more than 5m and can not lower than the height of pump. |
Applications This series of electric pumps are especially suitable for irrigation, garden watering and domestic water use, and can also be used in the construction of water supply and drainage. |
2.Product Parameter(Specification)
Q(D)XY 10T/15T/40T/50T/65T
Model |
POWER |
FLOW (m/h) |
HEAD (m)
|
0 |
1 |
1.5 |
3 |
4 |
6 |
8 |
10 |
13 |
16 |
OUTLET | ||
220V | 380V | (KW) | (HP) | |||||||||||||
Q(D)XY10-16-0.75 | QXY10-16-0.75 | 0.75 | 1 | 10 | 16 | 20 | 16 | 12 | 7 | - | - | - | - | - | - | 2” |
Q(D)XY10-20-1.1 | QXY10-20-1.1 | 1.1 | 1.5 | 10 | 20 | 26 | 20 | 8 | 5 | - | - | - | - | - | - | 2” |
Q(D)XY15-10-0.75 | QXY15-10-0.75 | 0.75 | 1 | 15 | 10 | 16 | 15 | 13.6 | 10 | 5.2 | - | - | - | - | - | 2½ |
Q(D)XY15-15-1.1 | QXY15-15-1.1 | 1.1 | 1.5 | 15 | 15 | 19 | 17.7 | 16.1 | 15 | 9.8 | - | - | - | - | - | 2½” |
Q(D)XY40-9-1.5 | QXY40-9-1.5 | 1.5 | 2 | 40 | 9 | 14.8 | 14.1 | 13.7 | 13.1 | 12.5 | 11 | 9 | - | - | - | 3” |
Q(D)XY50-8-1.8 | QXY50-8-1.8 | 1.8 | 2.4 | 50 | 8 | 10.6 | 10.4 | 10.1 | 9.7 | 9.3 | 9.1 | 8.5 | 8 | 3.5 | - | 3” |
Q(D)XY65-7-2.2 | QXY65-7-2.2 | 2.2 | 3 | 65 | 7 | 9.5 | 9.3 | 9 | 8.8 | 8.5 | 8.3 | 8.1 | 7.8 | 7 | 4.5 | 4” |
3.Product Feature And Application
Garden water
Farmland Irrigation
Landscape Fountion
Domestic Water
Sewage Discharge
Industrial Water
4.Production Details
5.Product Qualification
6.Notes for Immersible Water Pump
1. leakage maintenance device
The leakage maintenance device is also called a life-saving device, and its effect can be understood from the words 'life-saving device'. Because the submersible sewage pump operates underwater, simple leakage causes power loss and even electric shock. If the leakage maintenance device is installed, only the leakage value of the submersible sewage pump exceeds the operating current value of the leakage maintenance device (usually does not exceed 30 mA), and the leakage maintenance device will block the power supply of the submersible pump to ensure safety and prevent leakage and dross. Electrical energy.
2.prevent frequency switch
Do not switch the submersible pump frequently. This is because the recirculation occurs when the electric pump is stopped. If it is turned on immediately, the motor load will be started, causing the starting current to be too large to burn the winding. Because the current is very large when starting, frequent starts will also burn the submersible sewage pump motor windings.
3.Do not let the submersible sewage pump overload operation for a long time
In order to prevent the submersible pump from overloading for a long time, do not pump water with a large amount of sand and check whether the current value is a regular value on the nameplate. If the current is too large, stop it. In addition, the dehydration operation of the electric pump should not be too long to prevent the motor from overheating and burning.
4.pay attention to normal maintenance
Usually, you should always check the motor. If you find cracks in the lower cover, damage or failure of the rubber seal ring, you should replace or correct it in time to prevent water from entering the submersible pump.
7.FAQ
Q: Why i find some price on your items show only 1-50USD/pcs, when can i get the price at 1usd? |
A: 1-50usd is just a price range for your reference here. |
Q: How long i can get your reply after i send inquiry. |
A: You can get reply within 24hour from Monday to Friday, and within 48hours at weekend.If need urgent, please call us so we can reply soon after our phone communiated.Phone call is warmly welcome 24hours whole day. |
8 About us
In our company, there are large quantities of high-quality scientific research and management talents, strong technical force, advanced assembly equipment, and perfect detection devices. In addition, in order to meet the market demand, the company also provides the service of tailor-made products and develops new products on a regular basis.